Allen & Heath 32x32 Audio Matrix Processor Compatible with IP1/IP6/IP8 Remote Control AH-AHM-32

Allen & Heath AH-AHM-32 32x32 Audio Matrix Processor Compatible with IP1/IP6/IP8 Remote Control

AHM-32 is an audio matrix processor for sound management and installation. It is designed for audio distribution, paging, conferencing and speaker processing in a multitude of environments including corporate, hospitality, education, event and multi-purpose venues, retail, theatres, cruise ships and sports venues.

The AHM-32 processor is complemented by an extended ecosystem of remote audio expanders, remote controllers, interfaces, apps and software.

A family of portable, rack-mountable or wall- mount audio expanders is available with a choice of proprietary point-to-point Layer-2 or Dante transport protocols.

A range of IP remote controllers is available for volume control, music source selection, preset recall and more. AHM can also integrate with third party devices over GPIO, TCP/IP, or industry standard control systems. The Custom Control editor and app from Allen & Heath offer more control options and tailored user interfaces for multiple users and device types, with kiosk and BYOD capability.

Features:

• 32×32 Processing Matrix
• 12×12 Local Analogue I/O
• I/O Port for Audio Networking (Up to 128×128)
• Dante 96kHz Option Card (AES67 and DDM ready)
• SLink 128×128 Option Card for Audio Expansion
• 32 Configurable Processing Outputs – Mono / Stereo Zones or Speaker Processing
• 96kHz FPGA Core With Ultra-low Latency
• Front Panel Screen and Navigation
• 8x SoftKeys
• Compatible With IP1, IP6, IP8 Remote Controllers
• 2×2 Local GPIO Plus Networkable GPIO Interface
• TCP/IP Protocol for Third Party Integration
• Crestron, AMX and Extron Drivers
• Mac / Windows System Manager Software
• Custom Control app and Editor for BYOD
• 16 User Profiles
• Integrated Stereo Playback
• Event Scheduler

Specifications:

• Inputs:
  • Mic/Line Inputs: Balanced, +48V phantom power
  • Mic/Line Preamp: Fully recallable
  • Input Sensitivity: -60 to +15dBu
  • Analogue Gain: +5 to +60dB, 1dB steps
  • Pad: -20dB Active PAD
  • Maximum Input Level: +30dBu (PAD in)
  • Input Impedance: >3kΩ (Pad out), >8kΩ (Pad in)
  • Mic EIN: -127dB with 150Ω source
• System:
  • Measured balanced XLR in to XLR out, 20-20kHz, +5dB Gain, Pad out, signal @ 0dB (meter)
  • Dynamic Range: 108dB
  • System Signal to Noise: -92dB
  • Frequency Response: 20Hz - 20kHz +0/-0.5dB
  • THD+N (analogue in to out): 0.005% @ +16dBu output, 1kHz +5dB gain
  • Headroom: +18dB
  • Sampling Rate: 96kHz +/- 20 PPM
  • Acoustic Noise: Typical loading, 22 deg C ambient
  • No I/O Port installed: <29dBA
  • With I/O Port installed: 30dBA
• Outputs:
  • Analogue Outputs: Balanced, Relay protected
  • Output Impedance: <75Ω
  • Nominal Output: +4dBu = 0dB meter reading
  • Maximum Output Level: +21dBu
  • Residual Output Noise: -92dBu (muted, 22-22kHz)
• Dimensions and Weights:
  • Unboxed: 482.6mm x 270mm x 44mm x 4kg (19” x 10.6” x 1.7” x 8.8lbs)
  • Boxed: 555 x 405 x 150 mm x 5.45kg (21.8” x 15.9” x 5.9” x 12lbs)
  • Operating Temperature Range: 0 deg C to 40 deg C (32 deg F to 104 deg F)
  • Mains Power: 100-240V AC, 50-60Hz, 70W max